Wireless Remote Adapter for Studer A807, A812, A816 & A820 Tape Decks

Last updated March 12, 2022

I sell this on eBay for $74 or buy direct for $69. Shipping is $10 within the US or $25 outside the US.

Contact me at scott@revoxremotes.com

This adapter will control the following tape transport controls: Play, Stop, F.F., Rewind, Record as well as Zloc, Loc start & Timer Reset.

Includes a DirecTV universal remote which includes batteries and is preprogrammed to work with the remote receiver. A pair of jumpers inside the remote adapter allows you to select between four different remote codes in case you have a conflict with an existing Sony VCR or if you want to have multiple remote adapters in the same room.

The remote adapter can be programmed to respond to various Sony VCR codes. To select between them there are jumpers inside the unit. Remove the two screws on the bottom of the unit and remove the top cover. Located near the front window is a jumper block. These jumpers configure what type of Sony VCR codes the unit will respond to. See the table below for a list of jumper settings.

LDP = Laser Disc Player

Configuring the DirecTV Remote
To program the DirecTV Remote first slide the switch at the top of AV1 or AV2. Press and hold the MUTE and SELECT buttons until the green light at the top blinks twice then release. Using the number keypad enter the 5 digit code from the table above. If done correctly the green light will blink twice after the last digit is entered. Note: On the remote the Record button must be double pressed to activate the function. The full manual for the DirecTV remotes can be found DirecTV Remote.