What decks is it compatible with: It was designed for the Teac R-777X, R-888X, R-999X and V-850X cassette decks.

What's included: Wireless remote adapter, international AC adapter and a universal remote.

What does it control: The remote adapter controls the following 7 functions: Record, Stop, Forward Play, Reverse Play, Pause, Fast Forward, Rewind and Record Mute. All functions can be controlled using any universal remote programmed for the proper Sony VCR code. Using the supplied DirecTV remote the buttons are mapped to the functions as shown.

The remote adapter can be programmed to respond to Sony VHS VCR, Beta VCR, 8mm VCR and Laser Disc Player codes. To select between the four options there are two jumpers inside the unit. Remove the two screws on the bottom of the unit and remove the top cover.

Toward the front window are two jumpers labeled 1 and 2. They configure the remote device code per the table below.

* = Default jumper selection

Configuring the DirecTV Remote: To program the remote first slide the switch at the top to AV1 or AV2. Press and hold the MUTE and SELECT buttons until the green light at the top blinks twice then release. Using the number keypad enter the 5 digit device code from the table above. If done correctly the green light will blink twice after the last digit is entered. The full manual for the DirecTV can be found here: www.revoxremotes.com/Remotes/DirecTV.htm

For instructions on configuring other remotes go to this page and select from the list of tested remotes. Click Here

Remote adapters are also available for Aiwa, Akai, Ampex, Crown, Denon, Nakamichi, Otari, Pioneer, Revox, Sony, Studer, Tandberg, Tascam, Teac and Technics decks.