Denon RC-680 CD/MD Player Wireless Remote Adapter

RC-680 Wireless remote adapter for
Denon DN-C630, DN-C635, DN-650F, DN-C680, DN-951FA, DN-961FA, DN-981F
 CD and MD players
Plugs into the 25-pin Parallel Remote connector on the back of your unit.

I sell this on eBay for $78 or buy direct for $65 + shipping of $8 within the US or $23 outside.

Contact me at scott@revoxremotes.com
scott@revoxremotes.com is also my PayPal account

Installation: Turn off the power to the tape deck. Plug the remote adapter into the remote connector on the back of the tape deck. Now power can be turned back on. The light on the front of the remote adapter should be on.

This wireless remote adapter will control the following CD/MD transport functions: Play, Pause, Fast Forward, Rewind, Previous Track, Next Track and Standby/Cue from any universal remote programmed for Sony DVD player.

The remote adapter can be programmed to respond to Sony VHS VCR, Beta VCR, 8mm VCR and Laser Disc Player codes. To select between the four options there are two jumpers inside the unit. Remove the two screws on the bottom of the unit and remove the top cover.

Includes a universal remote which includes batteries and is preprogrammed to work with the remote receiver. A pair of jumpers inside the remote adapter allows you to select between four different Sony DVD remote codes in case you have a conflict with an existing Sony DVD player or if you want to have multiple remote adapters in the same room.

Installation:
Turn off the power to the CD player. Plug the remote adapter into the remote connector on the back. Now power can be turned back on. The light on the front of the remote adapter should be on.

The remote adapter controls the following eight functions (if supported): Play, Pause, Next, Previous, F.F., Rewind, Locate and Review. Since there is no button for Locate it is activated by pressing #1 on the key pad. Review is activated by pressing #2. Previous and Next are controlled by the two buttons above the Rewind and F.F. buttons or by the left and right arrow buttons next to the Select button. Locate will not work on the Auxiliary Version of the D730/D731. Review will not work on Version 2 or Auxiliary Versions of the D730/D731.

 

JMP1

JMP2

SIRC Code

DirecTV
Remote

JMP*

JMP*

26.73

20533

JMP
OPEN
26.250
21070
OPEN
JMP
26.83
21432
OPEN

OPEN

26.235

21431
* = Default jumper position

Configuring the DirecTV remote
To program remote first slide the switch at the top of AV1 or AV2. Press and hold the MUTE and SELECT buttons until the green light at the top blinks twice then release. Using the number keypad enter the 5 digit code from the table above. If done correctly the green light will blink twice after the last digit is entered. The full manual for the DirecTV remotes can be found here.

For instructions on configuring other remotes go to this page and select from the list of tested remotes. Click Here

Remote adapters are also available for Aiwa, Akai, Ampex, Crown, Denon, Nakamichi, Otari, Pioneer, Revox, Sony, Studer, Tandberg, Tascam, Teac and Technics decks.