Instructions for setting up the
Sony RM-V310
7 Component Universal Remote Control
This remote has one big, BIG problem. I've found that the number buttons don't work in Sony VCR modes. This makes it useless for setting VCR timers and for controlling special features on my Nakamichi remotes. Other than that, this is a solid feeling remote.
1) Find the Component Code number for the desired Device from the table below.
Device
|
Component Code
|
Sony Beta VCR
|
001
|
Sony 8mm VCR
|
002
|
Sony VHS VCR
|
003
|
Sony LDP
|
---
|
2) On the Sony RM-V310 remote press and hold the small black SET button in the upper left corner. While holding the SET button down, press and release the green POWER button. Now release the SET button.
3) Press and release the VCR button.
4) Enter the three digit Component Code on the remotes number pad followed by the ENT button.
The VCR preset should now be set.
The full instruction manual for this remote is located here --> Sony RM-V310 Manual
The complete list of Component Codes for this remote is located here --> Sony RM-V310 Codes